Dab Gear

This bubble-style carb cap is made with a Zanfirico glass working technique that was invented in the Venetian Islands. 

Made with borosilicate glass and available in a variety of color options. Diameter measures 25mm at the widest point. 

The bubble shape is great for sitting on top of a flat-top style banger and gives you full control to direct airflow where you need it. 

Deep nose carb caps pair perfectly with a deep bucket banger nail. The nose" reaches down to the bottom of the banger bucket to provide airflow right where you need it, on your concentrates.

The bubble shape lets you direct airflow and works especially well with bangers that have a beveled top edge.

Made with worked borosilicate glass and available in multiple color options. Diameter measures 22mm at the widest point. 

This lampworked bubble-style carb cap works well with flat-top bangers and gives you ultimate airflow control. 

Made with borosilicate glass and features dotted stripes of dotted colors. Measures 25mm at the widest point. 

This beautiful worked color carb cap will look spectacular sitting on top of your banger and rig setup. 

Made to fit a variety of bangers including flat tops and slant cuts. Provides directional airflow.

Made with borosilicate glass and measures 30mm at the widest point. Available in a variety of color options.

This bullet style carb cap for the RoK Electric Dab Rig is made to be used with the XL Cloud Collar and can also be used with a variety of bangers.

Provides an excellent seal with the beveled edge of the silicone collar. The rounded bullet shape allows you to push puddles of your concentrates around on the coil surface.

Made with durable borosilicate glass and measures 21mm in diameter at the widest point. This bullet style carb cap is made for use with concentrates.

HIGHLIGHTS

• Replacement carb cap for RoK Electric Dab Rig
• Made for use with concentrates
• Certified accessory item
• Bullet style carb cap
• Borosilicate glass
• 21mm diameter
• Exact fit

Note: This cap has an extended nipple and will not fit the standard silicone collar that comes with the original RoK design.

Highlights

• 38mm diameter
  
• Silicone containers
• Non-stick
• 7mL capacity
• Multiple color options
  

Highlights

• 6 inches long
• Dab taster bat
• Heat resistant quartz
• Clear body

• 11 inch dab tool
• Made with stainless steel
• Two massive different types of scrapers

• Steel dab tool
• Anodized metal
• Various styles

• 3 inch (7.62cm) dab tool
• Anodized metal
• Various styles

• 3 inch (7.62cm) dab tool
• Gold metal
• Various styles

These Gold Series Dab Tools feature a variety of shapes and styles of dab tools so you can poke and scrape into any corner you might find to make the most of your dabbing experience.

• Steel dab tool
• Gold metal
• Various styles

• 3 inch (7.62cm) dab tool
• Silver metal
• Various styles

These Pulsar Sparkling Bell Style Carb Caps features a bullet shaped body in varying colors and designs. Fits bangers and other nails with a 28mm diameter or smaller bucket opening. Multiple color options available.

• 28mm glass carb cap
• Borosilicate glass
• Bubble style
• Multiple color options available
  

These Pulsar Bubble Carb Caps features a multicolor twist. Provides directional airflow for the best vapor production. Fits bangers and other nails with a 26mm diameter or smaller bucket opening. These carb caps can stand on their own so they stay clean from dust and other impurities. 

• 27mm glass carb cap
• Borosilicate glass
• Directional airflow
• Bubble design

This Quartz Flared Bottom Banger is a pure quartz nail with a beveled bucket opening that provides an tight air seal with your carb cap for more effective vaporization.

The bucket has a flared bottom that allows the user's large dab to spread out and help prevent it from going down the tube.

Features a 45 degree joint and comes in 10mm & 14mm joint sizes. Bucket inner diameter measures 13mm in diameter.

These worked glass carb caps are made specifically for use with the Pulsar RoK Electronic Dab Rig.

The bubble shape provides an airtight seal with the silicone collar that it rests on. The cap also provides directional airflow for excellent vapor production and efficiency.

Made with borosilicate glass and features a 25mm diameter.

These worked glass carb caps are made specifically for use with the Pulsar RoK Electric Dab Rig. The bubble shape provides an airtight seal with the silicone collar that it rests on. A rainbow swirl design has a stripe of UV blacklight reactive glass to make it fun to use at parties. The cap also provides directional airflow for excellent vapor production and efficiency. Made with borosilicate glass and features a 25mm diameter.

Get the most efficient heating possible with this Pulsar Axial Opal Quartz Banger which is compatible with the Axial eNail setup. This banger is designed with a special arm on the side that helps hold the Axial coil and provide even heating during dab sessions. The beveled bucket top provides a tight seal with the included directional carb cap. Bucket diameter measures 25mm and the nail joint fitting is 14mm male.

This certified replacement carb cap for the Pulsar RoK Electric Oil Rig is made with durable borosilicate glass and measures 25mm in diameter. Made for use with concentrates and provides directional airflow with a spinning glass pearl inside. Available in multiple color options.

HIGHLIGHTS

• Carb cap for Pulsar RoK
• Made for use with concentrates
• Certified accessory item
• Spinning pearl inside
• Borosilicate glass
• 25mm diameter
• Exact fit
• Various color options

Efficient Directional Airflow

This Wig Wag Bubble Carb Cap can be manipulated to direct air flow into bangers with openings smaller than 27mm.

Carb caps allow for cooler dabs conserving the flavor for longer sessions. Being able to direct the airflow helps ensure that customers get maximum efficiency with concentrates and their product is completely vaporized. Diameter measures 27 millimeters wide.

HIGHLIGHTS

• 27mm glass carb cap
• Worked borosilicate glass
• Directional airflow
• Wig wag bubble design

An integrated part of the Pulsar RöK, the Carb Cab is an essential piece to the quality and craftsmanship of the eRig.  This certified replacement carb cap for the Pulsar RöK Electric Oil Rig is made with durable borosilicate glass and measures 29mm in diameter. Made for use with concentrates and provides directional airflow. 

HIGHLIGHTS

• 29mm diameter
• Made for use with concentrates
• Incredibly strong borosilicate glass construction
• Certified Pulsar Vaporizers Replacement Part
• Made to work specifically with the Pulsar RöK Electric Oil Rig

This Pulsar Quartz Banger is a pure quartz nail with a beveled bucket opening that provides a tight air seal with your carb cap for more effective vaporization.

The bucket has a 5mm thick bottom quartz disc that retains heat and holds it over a longer period of time. Great for cold starts and low temp dab sessions.

Features a 90 degree joint and comes in a variety of 14mm and 19mm joint sizes.

The Pulsar U-Neck Quartz Banger is a pure quartz 90 degree nail w/ a thick bottom quartz bucket for excellent heat retention and a groundless joint for a more solid connection. The bucket opening is beveled to allow for a tight seal with your 20mm (or larger) carb cap. The thick quartz bottom retains heat for much longer than regular quartz. Inner bucket diameter measures 19mm.