eNails & eRigs

The Axial Mini eNail is the best solution for heating quartz or titanium nails with an eNail coil. This revolutionary coil design heats the bottom of the nail in addition to the sides for the most even heating possible. The kit includes everything needed to elevate your dab experience except for the pipe. The components of the kit are also cross-compatible with all other Pulsar Elite Series eNail products. Covered by a 1 year warranty on the control box and a 6 month warranty on the heating cord.

• Elite Series Axial eNail Power & Temperature Control Box
• 5 foot removable power cord
• 4 foot heating coil cord
• 6-in-1 Quartz / Titanium hybrid nail
• Titanium carb cap

• Digital display with push button controls
• Accommodates 25mm nails
• Rear On/Off switch
• Temperature Range: 0°F - 1200°F
• Voltage Range: 90-150v
• Power: 150w

CLICK HERE TO DOWNLOAD: Axial User Manual

The Hand-E Nail V3 eRig is a powerful, portable, handheld wax & oil ripper that heats from 650°F (343°C) to 1,000°F (537°C) with one-button ease. The eRig comes with an improved ceramic nail as well as titanium & quartz nails. Multiple color options available.

Features include an 18650 / 2500mAh Li-ion battery, magnetic carb cap w/ removable dab tool, improved glass bubbler attachment, glass mouthpiece, 3-click on/off locking system, silicone oil slick container. Hard case storage box, USB charging cable, and manual included. Starting temp: ~ 650 degrees F; Max temp: 1000 degrees F. 1 year end user warranty.

• Portable handheld dab rig kit
• Comes with ceramic, titanium & quartz nails
• Starting temp: 650°F (343°C); Max temp: 1000°F (537°C)
• 18650/2500mAh Li-ion battery
• Magnetic carb cap w/ removable dab tool
• Improved glass bubbler attachment
• Kit includes everything but the oil

CLICK HERE TO DOWNLOAD:
Pulsar Hand e-Nail V3 User Manual

This Micro eNail Kit contains everything you need to start dabbing except for the water pipe and the concentrates. The Micro eNail allows you to dial into the exact temperature you need for your dabs.

The kit includes: - Pulsar Elite Series Micro eNail Power and Temperature Control Box with Digital Screen. - Accommodates 20mm nails - removable power cord -4ft. heating coil cord - Grade 2 titanium universal nail (6 sizes in 1) - Titanium carb cap - Instruction card

• Micro eNail Kit
• Temperature control via digital readout
• Works with up to 20mm nails
• power cord
• 4 ft. heating coil cord
• Grade 2 titanium universal nail
• 14mm
• 19mm
• Male
• Female
• Titanium Carb Cap
• 220 - 990 degrees F
• 120 Volts / 150 Watts
• Pulsar Logo
• 1-year warranty on the control box
• 6-month warranty on the heating cord

The Elite Series Mini eNail w/ 6-in-1 Nail provides simple push-button operation, exact temperature control, and comes with a compatible Universal 10/14/19mm Ti Nail. This portable powerhouse kit features a digital control box with removable, locking 5ft power cord; a temperature range from 0-1200° F; a 20mm compatible heating coil with 4ft cord; and a grade 2 Titanium carb cap with dabber handle. 

• 150w portable enail (0-1200 degrees F)
• 20mm heating coil
• Universal 10/14/19mm Ti nail (included)
• Digital display and push button operation
• Removable, locking 5ft power cord

Now includes the updated coilless quartz V2 atomizer!

Feast your eyes on the best portable electric dab rig available. This rig enables the ability to experience premium innovation and taste the finer properties of your exquisite concentrates and open up their full flavor profile. The Pulsar RöK is where functionality meets performance and enables yet another way to enjoy higher culture.

The updated V2 coil for concentrates has increased surface area which provides bigger clouds and heats faster and more evenly than the original coil!

Includes a FREE limited edition RöK hat pin!

• 6.75" (17.14 cm) tall
• Isolated air paths
• 3 voltage settings
• 30 second 'RöK Mode'
• All metal body
• Coilless quartz V2 atomizer (updated)
• Ceramic atomizer cup
• Boro glass filtration base
• Disc percolator
• Carb caps included
• 1 year limited warranty

• 1 - Dabber Tool
• 2 - Wire brushes
• 1 - Herb Carb Cap
• 1 - Wax Carb Cap
• 1 - Coil-less quartz V2 atomizer cup
• 1 - Coil-less ceramic atomizer cup
• 2 - Silicone atomizer collars
• 1 - USB charging cable
• 4 - Crud Bud alcohol filled cotton buds

CLICK HERE TO DOWNLOAD: Pulsar RöK User Manual

The quartz eNail banger is made to work with 20mm heating coils and has a built-in coil rest. Made with premium 100 percent quartz.

This carb cap is made to function with the Axial Enail and standard bangers that measure 25mm or less in diameter. The carb caps feature a conical shape and a dabber tip end.

• 4 inches (10.16 cm) long
• Dome cap w/ dabber tip
• Borosilicate glass
• Made to function with the Pulsar Axial Enail
• Conical carb cap
• Multiple color options
  

The Axial Heating Coil features a revolutionary coil design that heats the bottom of the nail in addition to the sides for the most even heating possible. The coil and cord are cross compatible with all Elite Series eNail products. Features a 4 foot cord length and a 24mm opening. Works as a replacement coil for the Pulsar Axial Mini eNail Kit.

Get the most efficient heating possible with this 6-in-1 Pulsar Axial Hybrid Nail which is compatible with the Axial eNail setup. The nail fits 10, 14 and 19mm sizes of both male and female joint fittings to fit most water pipes on the market. Made with an indestructible Titanium body and includes both Quartz and Titanium interchangeable cups.

This quartz donut cup is a certified replacement part for the Pulsar Axial Hybrid Nail. The nail design incorporates an interchangeable donut cup design with a threaded screw that attaches the cup to the Titanium body.

Get the most efficient heating possible with this Axial Opal Quartz Banger which is compatible with the Axial eNail setup. This banger is designed with a special arm on the side that helps hold the Axial coil and provide even heating during dab sessions. The beveled bucket top provides a tight seal with the included directional carb cap. Bucket outer diameter measures 25mm and the nail joint fitting is 14mm male. Bubble carb cap included.

This Ball Spinner Carb Cap is made to function with the Pulsar Axial Enail. Measuring 30mm in diameter and 47mm tall, this carb cap utilizes directional airflow to assist in vaporizing concentrates and feature an internal spinning bead that visually demonstrates the air vortex within the carb cap.

• 30mm diameter
• Borosilicate glass
• Directional airflow
• Made to function with the Pulsar Axial Enail
• Internal spinning bead

This Pulsar Spinning Beaker Enail Banger Cap is made to function with the Pulsar Axial Enail. Measuring 30mm in diameter with an inner diameter of 25mm and a height of 70mm, this carb cap utilizes directional airflow to assist in vaporizing concentrates and feature an internal spinning bead that visually demonstrates the air vortex within the carb cap.

• 30mm diameter
• Borosilicate glass
• Directional airflow
• Beaker shape design
• Made to function with the Pulsar Axial Enail
• Internal spinning bead